Skip to main content

Course Outline

Shotguns are classified by gauge, which is a measure related to the diameter of the smooth shotgun bore and the size of the shotshell designed for that bore.

  • Common shotgun gauges are 10-gauge, 12-gauge, 16-gauge, 20-gauge, and 28-gauge. The smaller the gauge number, the larger the shotgun bore. Gauge is determined by the number of lead balls of size equal to the approximate diameter of the bore that it takes to weigh one pound. For example, it would take 12 lead balls with the same diameter as a 12-gauge shotgun bore to weigh one pound. Today, however, gauge can be measured much the same way as caliber, by measuring the inside bore diameter.
  • The .410-bore shotgun is the only exception to the gauge designation for shotguns. It has an actual bore diameter of 410/1000ths of an inch, which is approximately equivalent to a 67½ gauge.
  • Each gauge of shotgun shoots only shells of the same gauge. For example, 12-gauge guns use only 12-gauge shells.
  • The gauge of a shotgun is usually marked on the rear of the barrel, and the gauge of a shell is marked on the shell as well as on the factory box.
Shotgun gauge sizes

Sizes shown are the minimum inside bore diameter with a tolerance of +0.020". Data is presented courtesy of SAAMI.

  • Unit 3 of 10
  • Topic 7 of 10
  • Page 4 of 8