Skip to main content

Course Outline

Cleaning a Muzzleloader

Firing a muzzleloader leaves a corrosive residue inside the barrel that causes pitting and reduces accuracy. The buildup of residue, called fouling, also will make loading difficult.

  • To avoid fouling, swab the barrel with a moist patch after each shot. The patches or cleaning rags used to wipe the barrel must be the correct size and should be made of cotton or approved synthetic materials. Follow the recommendations of retailers who sell muzzleloaders or those who regularly use muzzleloaders.
  • Thoroughly clean a muzzleloader after each shooting session. Black powder residue can damage the barrel if left overnight.
  • Clean the gun’s lock periodically. Normally it’s held in place by one or two bolts. Once the lock has been removed, scrub both sides with an old toothbrush and hot water. Make sure the entire lock is completely dry, and then lightly oil and replace it.
Muzzleloader cleaning supplies: brush
  • Unit 5 of 10
  • Topic 2 of 5
  • Page 9 of 10