Skip to main content

Course Outline

Skip audio player
Steps for loading a muzzleloader
  1. Measure powder charge.
  2. Pour measured powder down barrel.
  3. Place patch and ball on muzzle.
  4. Tap ball into barrel with starter.
  5. Take out ramrod.
  6. Ram ball down barrel.
  7. Be sure ball is completely seated.
  8. Clear vent hole with pick if necessary.
  9. On flintlock muzzleloader, pour powder into pan and close frizzen.
  10. On percussion lock muzzleloader, place cap on nipple.
  • Unit 7 of 10
  • Topic 2 of 6
  • Page 3 of 9