Skip to main content

Course Outline

Skip audio player
Shooter firing muzzleloader

The firing procedure depends on the type of muzzleloader you are using.

  • Percussion Lock Muzzleloader: When you’re ready to fire the muzzleloader safely, place the percussion cap on the nipple. Be sure that your surroundings and your backstop are safe. Then aim and fire.
  • Flintlock Muzzleloader: When priming a flintlock, pull the hammer to a half-cock position and open the priming pan cover. Check your flint, making sure the setting is tight and properly adjusted. Insert a vent pick or fine wire into the barrel’s touchhole to make sure the opening is clear. With your pan primer, fill the pan about three-fourths full of FFFFg powder. Close the frizzen and pull the hammer to full cock when you’re ready to fire the shot safely.

After firing, place the hammer in the half-cock position and swab the barrel to remove sparks that might be inside.

  • Unit 5 of 9
  • Topic 2 of 6
  • Page 6 of 9