Merely climbing into or out of a tree stand or other elevated platform to hunt puts you at risk. Long hours spent waiting in a stand, as well as poor safety techniques, can lead to accidental falls. To protect yourself, use good judgment and follow these recommendations, always putting safety first.

  • Purchase a commercial stand that is manufactured, certified, and tested to TMA standards.
  • Read the manufacturer’s instructions and watch the video that accompany the stand. Review this information each season before using the stand.
  • Attach your FAS to the tree while at ground level, and keep it attached throughout your hunt – from the time you leave the ground until you get back down.
  • Use a tree stand only during daylight hours.
  • Practice first with your tree stand and FAS at ground level, using all safety devices that were included with the stand. Then continue to practice, gradually going higher.
  • When climbing into or out of a tree stand, always use three points of contact with your hands and feet.
  • Keep a firm hold on the climbing system as you enter or leave a platform, and don’t let go until you’re certain you are secure.
  • Get enough sleep to ensure that you are well rested before using a tree stand.
  • Carry a signaling device, such as a whistle, radio, or cell phone, to let others know if you have a problem.
  • Take your time and plan every move you make while installing and using an elevated stand.
  • Check your stand carefully prior to each use. Do not leave a stand attached to a tree for more than two weeks.
  • Never exceed the weight limit of your stand or FAS. Remember that the weight includes you plus your equipment.
  • Do not climb with anything in your hands or on your back. Use a haul line.
  • Raise and lower all hunting equipment on the opposite side of the tree from your climbing route.
Illustration of injured hunter lying on the ground, who fell from a treestand and who was not wearing an FAS