Differences Between Rifles, Shotguns, and Handguns

The main differences between rifles, shotguns, and handguns are their barrels and the type of ammunition used.

• The rifle barrel is long and has thick walls with spiraling grooves cut into the bore. The grooved pattern is called rifling.
• The shotgun barrel is long and made of fairly thin steel that is very smooth on the inside to allow the shot and wad to glide down the barrel without friction. It’s thinner than a rifle barrel since it does not have to withstand the same pressure.
• The handgun barrel is much shorter than a rifle or shotgun barrel because the gun is designed to be shot while being held with one or two hands, rather than being placed against the shooter’s shoulder. The bores of most handgun barrels also have a grooved pattern similar to rifles.

The Damascus Barrel

Damascus or “Damascus twist” barrels are older shotgun barrels that typically were made before 1900. Iron and steel ribbons were twisted and welded together. Damascus barrels are weaker than modern barrels and are not designed for the high gas pressures created by modern ammunition. Damascus barrels have a distinctive, irregular pattern of short, streak-like marks around the barrel.

If you have a Damascus barrel gun, don’t shoot it. The barrel may burst slightly ahead of the chamber, crippling the shooter’s hand or forearm. If you have an older firearm and are not sure if it has a Damascus barrel, go to a qualified gunsmith to identify its make before shooting it.

Reloaded shells may have wrong information or have been improperly reloaded. It’s important to mark reloaded shells clearly. Use only shells or cartridges that you have reloaded yourself or that have been reloaded by a person whom you know is competent.