Effective October 30, 2009, the Delaware Division of Fish and Wildlife changed their guidelines for distance learning. Students are now required to spend a minimum amount of time on each course page before proceeding to the certification exam.

Click here to go to the latest version of the Today's Hunter in Delaware online course—the official hunter education course of the Delaware Division of Fish and Wildlife.

The following course material is for reference only. Please go to the new course to complete your Delaware certification.

Cleaning Your Firearm

Clean your firearms after every use to keep them in top condition. Every hunter should own a complete cleaning kit.

Work on a cleared table or bench. Always give cleaning your full attention. Never clean a firearm while doing something else.

Cleaning firearms kit

Follow these basic steps to clean your firearm.

Point the muzzle in a safe direction, and make sure the gun is unloaded.
Remove all ammunition from the cleaning bench.
For the most thorough cleaning, field strip the firearm following the owner’s manual and clean each part separately.
Follow the instructions in your cleaning kit. If possible, clean the barrel from the breech end, using a bore guide and a cleaning rod holding a bore-brush or patch, wetted with solvent. Pass the brush/patch all the way through the barrel. Repeat several times with fresh patches. You may need a larger brush for the chamber. Use a hand brush to clean the crevices where powder residue accumulates. Follow with a dry patch, and finish with a lightly oiled patch for the barrel and cloth for other parts.

A Cleaning Kit Should Include:

Assorted rod tips—brushes, mop tips, slotted tips, jag tips
Bore light
Clean cloths
Cleaning rods
Cotton swabs
Dental mirror
Gun grease
Gun oil
Gunsmith screwdrivers
Patches appropriate for the caliber or gauge of the firearm
Pipe cleaners
Solvent
Stand to hold the firearm securely in a horizontal position
Toothbrush

Use a flexible “pull-through” cleaning cable when cleaning firearms with lever or semi-automatic actions to prevent dirt, grime, or debris from being pushed into the action area.

Use cleaning solvents in a well-ventilated area and only as directed.

If cleaning from the muzzle end, use a muzzle protector so that you don’t damage the rifling near the muzzle.

Steps for Cleaning a Firearm

	1. Clean barrel and metal parts with good commercial solvent.
	2. Bore should be cleaned through breech end where possible.
	3. Clean bore until dry patch comes through as clean as possible.
	4. Run oily patch through barrel.
	5. All metal parts should get light coat of oil.
	6. Store in horizontal position.
	7. After storage, run a clean patch through bore before firing.
	8. Remove all excess grease and oil.