- Follow these basic steps to clean your firearm.
- Point the muzzle in a safe direction, and make sure the gun is unloaded.
- Remove all ammunition from the cleaning bench.
- For the most thorough cleaning, field strip the firearm as directed in the firearm owner’s manual. Then clean each part separately.
- Follow the instructions in your cleaning kit. If possible, clean the barrel from the breech end, using a bore guide and a cleaning rod holding a bore-brush or patch, wetted with solvent. Pass the brush/patch all the way through the barrel. Repeat several times with fresh patches. You may need a larger brush for the chamber. Use a hand brush to clean the crevices where powder residue accumulates. Follow with a dry patch, and finish with a lightly oiled patch for the barrel. Use cloth for other parts.
|
A Cleaning Kit Should Include:
- Assorted rod tips—brushes, mop tips, slotted tips, jag tips
- Bore light
- Clean cloths
- Cleaning rods
- Cotton swabs
- Dental mirror
- Gun grease
- Gun oil
- Gunsmith screwdrivers
- Patches appropriate for the caliber or gauge of the firearm
- Pipe cleaners
- Solvent
- Stand to hold the firearm securely in a horizontal position
- Toothbrush
|